ขาย Psy Sdrplay Rsp1A ตัวรับสัญญาณ Wideband Sdr 1Khz-2Ghz 14Bit Sdr Am Fm Hf Ssb Cw ตัวรับสัญญาณวิทยุแบบเต็ม Ham ราคาที่ดีที่สุด
0
การให้คะแนน
฿7,065
49% OFF
฿3,604
| เรือจาก | ต่างประเทศ |
|---|
รายละเอียดสินค้า
#SDRPLAY #RSP1A #Wideband #SDR #Receiver #1kHz-2GHz #14Bit #SDR #AM #FM #HF #SSB #CW #Receiver #Full
SDRPLAY RSP1A Wideband SDR Receiver 1kHz-2GHz 14Bit SDR AM FM HF SSB CW Receiver Full Band HAM Radio
100% brand new and high quality
Features:
1. 1kHz–2000 MHz Continuous Coverage
2. 14-bit ADC Silicon Technology
3. Up to 10MhZ Visible Bandwidth
4. 11 High-Selectivity Built-in Front End Preselection Filters
5. Windows Linux-Android & Raspberry Pi 3
6. Free SDRuno Software
Main additional features of the RSP1A compared to the original RSP1:
1. ADC resolution increased to 14-bit native for sample rates below 6 MHz, increasing to 16 bits with decimation
2. Enhanced RF pre-selection (greater filter selectivity plus 4 additional sub-bands compared to the original RSP1) for reduced levels of spurious responses
3. Improved LNA architecture with variable gain - the RSP1 had just a single gain step
4. Improved intermodulation performance
5. Performance extended to cover 1kHz to 2 GHz with a single antenna port
15.Bias-T facility
6. Improved frequency stability incorporating a 0.5ppm TCXO (software trimmable to 0.01ppm)
7. Selectable broadcast AM/FM/DAB notch filters
8. RF shielding within the robust plastic casiF3
Notice:
1. An open API allows developers to create new demodulators or applications around the platform.
2. The RSP1A is also compatible with HDSDR, SDR-Console and Cubic SDR software packages
3. Used with the free Professional SDRUno SDR Software you can enjoy all modes of operation whilst monitoring up to 10 MHz of spectrum in real time. SDRUno software allows you to operate from 1 up to 4 independent virtual SDR Receivers within the selected 10MHz bandwidth of the SDRplay hardware. The actual number of Virtual SDR receivers is limited by the processing power of the PC in use.
SDRplay RSP1A Specification:
Low Current: 185mA (excl Bias T)
Connectivity
Single 50Ω RF Connector (SMA)
USB 2.0 (high speed) type B socket
Frequency Range: Continuous Coverage 1kHz - 2GHz
Frequency Tolerance: 0.5ppm (Max)
ADC Characteristics:
Sample frequency: 2 - 10.66MSPS
14-bit native ADC (2 - 6..48MSPS)
12-bit (6.048 - 8.064MSPS)
10-bit (8.064 - 9.216MSPS)
8-bit (>9.216MSPS)
Bias T
Software selectable 4.7V @ 100mA
Reference:
High stability 0.5PPM TCXO
In-field trimmable to 0.01PPM
Maximum recommended input power
0dBm continuous, 10dBm for short periods
Typical Noise Figures:
18dB @ 2MHz
15dB @ 12MHz
15dB @ 25MHz
15dB @ 40MHz
3.3dB @ 100MHz
3.3dB @ 200MHz
7.7dB @ 386MHz
3.6dB @ 660MHz
5.0dB @ 1500MHz
6.3dB @ 1800MHz
IF Modes:
Zero IF, All IF bandwidths
Low IF, IF bandwidths ≤ 1.536MHz
IF Bandwidths:
200kHz
300kHz
600kHz
1.536MHz
5.0 MHz
6.0 MHz
7.0 MHz
8.0 MHz
Front End Filtering:
Automatically configured
Low Pass:
2MHz
Band Pass:
2 - 12MHz
12 - 30MHz
30 - 60MHz
60 - 120MHz
120 - 150MHz
250 - 300MHz
300 - 380MHz
380 - 420MHz
420 - 1000MHz
High Pass:
1000MHz
Notch Filters:
FM Filter > 50dB 85 - 100MHz
MW Filter >30dB 660 - 1550kHz
DAB Filter >30dB 165 - 230MHz >3>30dB 660 - 1550kHz
>30dB 660 - 1550kHz
Package included:
1 x Host
1 x USB data cable
1 x Antenna