Thailand

#SDRPLAY #RSP1A #Wideband #SDR #Receiver #1kHz-2GHz #14Bit #SDR #AM #FM #HF #SSB #CW #Receiver #Full 
SDRPLAY RSP1A Wideband SDR Receiver 1kHz-2GHz 14Bit SDR AM FM HF SSB CW Receiver Full Band HAM Radio
100% brand new and high quality

Features:

1. 1kHz–2000 MHz Continuous Coverage

2. 14-bit ADC Silicon Technology

3. Up to 10MhZ Visible Bandwidth

4. 11 High-Selectivity Built-in Front End Preselection Filters

5. Windows Linux-Android & Raspberry Pi 3

6. Free SDRuno Software

Main additional features of the RSP1A compared to the original RSP1:



1. ADC resolution increased to 14-bit native for sample rates below 6 MHz, increasing to 16 bits with decimation

2. Enhanced RF pre-selection (greater filter selectivity plus 4 additional sub-bands compared to the original RSP1) for reduced levels of spurious responses

3. Improved LNA architecture with variable gain - the RSP1 had just a single gain step

4. Improved intermodulation performance

5. Performance extended to cover 1kHz to 2 GHz with a single antenna port

15.Bias-T facility

6. Improved frequency stability incorporating a 0.5ppm TCXO (software trimmable to 0.01ppm)

7. Selectable broadcast AM/FM/DAB notch filters

8. RF shielding within the robust plastic casiF3

Notice:

1. An open API allows developers to create new demodulators or applications around the platform.

2. The RSP1A is also compatible with HDSDR, SDR-Console and Cubic SDR software packages

3. Used with the free Professional SDRUno SDR Software you can enjoy all modes of operation whilst monitoring up to 10 MHz of spectrum in real time. SDRUno software allows you to operate from 1 up to 4 independent virtual SDR Receivers within the selected 10MHz bandwidth of the SDRplay hardware. The actual number of Virtual SDR receivers is limited by the processing power of the PC in use.





SDRplay RSP1A Specification:



Low Current: 185mA (excl Bias T)

Connectivity

Single 50Ω RF Connector (SMA)

USB 2.0 (high speed) type B socket

Frequency Range: Continuous Coverage 1kHz - 2GHz

Frequency Tolerance: 0.5ppm (Max)



ADC Characteristics:

Sample frequency: 2 - 10.66MSPS

14-bit native ADC (2 - 6..48MSPS)

12-bit (6.048 - 8.064MSPS)

10-bit (8.064 - 9.216MSPS)

8-bit (>9.216MSPS)

Bias T

Software selectable 4.7V @ 100mA



Reference:



High stability 0.5PPM TCXO

In-field trimmable to 0.01PPM

Maximum recommended input power

0dBm continuous, 10dBm for short periods

Typical Noise Figures:

18dB @ 2MHz

15dB @ 12MHz

15dB @ 25MHz

15dB @ 40MHz

3.3dB @ 100MHz

3.3dB @ 200MHz

7.7dB @ 386MHz

3.6dB @ 660MHz

5.0dB @ 1500MHz

6.3dB @ 1800MHz

IF Modes:

Zero IF, All IF bandwidths

Low IF, IF bandwidths ≤ 1.536MHz

IF Bandwidths:

200kHz

300kHz

600kHz

1.536MHz

5.0 MHz

6.0 MHz

7.0 MHz

8.0 MHz

Front End Filtering:

Automatically configured

Low Pass:

2MHz

Band Pass:

2 - 12MHz

12 - 30MHz

30 - 60MHz

60 - 120MHz

120 - 150MHz

250 - 300MHz

300 - 380MHz

380 - 420MHz

420 - 1000MHz

High Pass:

1000MHz

Notch Filters:

FM Filter > 50dB 85 - 100MHz

MW Filter >30dB 660 - 1550kHz

DAB Filter >30dB 165 - 230MHz >3>30dB 660 - 1550kHz

>30dB 660 - 1550kHz



Package included:

1 x Host
1 x USB data cable
1 x Antenna