Thailand

800w Redhead Light 
This is a continuous Red Head light with an 800w halogen bulb and a barn door. There is a screw at the bottom of the lamp which can modulate the bulb's focus. The light attached with the foldable barn door to adjust light intensity when change the placket angle of barn door. When the bulb is much more closed to the bottom of the light, the ray will be more centralize. On the contrast, when the bulb is far from the bottom, the ray will be scatted.

Technical Specifications：
Power: 800W
Rated voltage: 220V 
Weight: 2.0Kg
Color emerging: Ra≥ 90
Color temperature: 3200K


Pacakge including：
1 x Red Head Continuous Light
1 x Barn Door
1 x Silver Safety Mesh
1 x 5m power cord
1 x 220V bulb
1 x tripod(only when you choose the option with tripod)


Notes on the use of light:
1. Pad a clean cloth before installing the bulb to avoid the sweat on your hands from staining the glass of the tube, which will shorten the life of the bulb, and avoid violent vibration during use as much as possible
2. When you hold the bulb in your hand, please hold one end of the tube and do not touch the glass part;
3. The filament is brittle and the temperature is high. Therefore, the lamp is more consumable, and consumables cannot provide a shelf life, please know. It is recommended to multiply several lamps.

Instructions for first use:
There will be smoke during the first use. This is caused by the rust-proof oil sprayed by the anti-scalding net on the new lamp. This phenomenon is common to these lamps, but it is not a quality problem and does not affect the use. It is recommended to use the following sequence when first using:
1. Disconnect the power before assembling, install the lamp on the lamp holder with the lamp port facing up;
2. Turn on the power;
3. Turn off the power immediately when the net cover emits "white smoke";
4. Wait for the temperature to drop, then turn on the power and dry repeatedly
After the above operation, there will be no "smoke" in the instant high-temperature tanning antirust oil.