Thailand

40A Brushless ESC Features: Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected.
Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters.
User programmable.
Multiple procedure methods supported: transmitter stick, LED procedure Card. Very easy to procedure the ESC at home or at the flying field.
Compatible with Lipo and NiMH battery. Timing can be changed to be suitable for different brushless motors. Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection.

40A Brushless ESC Specifications:
Types: long, short
Current: 40A
Output capacity: continuous current 40A, short-time current 55A (not less than 10 seconds)
Power input: 2-4 lithium batteries(Not Included)
BEC output: 5V@3A (linear regulator e - linear e)
Maximum speed: 210,000 rpm for 2-pole motor, 7000 rpm for 6-pole motor, 35,000 rpm for 12-pole motor
Size: (Approx) 68x25x8mm
SG90 9G Micro-Servo:
This is the most popular mini servo. Only weighs 9 gram and gives you a 1.5 kg/cm torque. Pretty strong regarding its size. Suitable for beam type robots.
Color: black + orange
Material: plastic+metal
Key features:
Translucent body
Lightweight
Less noise
SG90A 9G servo parameters:
Size: 21.5mmX11.8mmX22.7mm
Weight: 9 grams
No load speed: 0.12 sec / 60 deg (4.8 V)
Locked-rotor torque: 1.5-1.7kg/cm (4.8V-6V)
Operating temperature: -30~~+60 degrees Celsius
Dead zone setting: 5 microseconds
Working voltage: 4.8V-6V
A2212 1400kv Motor Specification:
KV: 1400
Ri(M Ω): 0.033
Battery: 2-3Li-Po
Max Power: 342W
Test Prop: 7x3/7x4
Motor Size: 27.5x38mm/1.08 inchx1.5 inch
Shaft Diameter:3.17mm/0.12 inch

Package Contents:
1 x 40A Brushless ESC
1 x A2212 1400kv Motor
2 x SG90A 9G servo
1 x Accessories Set

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.