ขาย Ultrasonic Bird Repeller Solar Powered Ultrasonic Pest Repeller Bird Dog Cat Mouse Chaser uIEH ราคาที่ดีที่สุด

Features: Volume Adjustment The user can adjust the playback volume according to the need to repel birds and the area to repel birds. Rainproof Design The perfect rainproof design makes the bird repellent more convenient for outdoor use. Voice Type The intelligent voice bird repeller has designed 8 kinds of pre-stored sound files. The user can toggle the DIP switch according to the needs of production applications to enable the applicable sound types to achieve the most ideal bird repelling effect. Solar Powered by solar panel, without messy power cord, low energy consumption and environmental-friendly. Specification: 1，Condition: 100% Brand New 2，Material: Plastic 3，Color: Dark Cyan 4，Battery: 3pcs of 800mAh AA Rechargeable Battery (Included) 5，Power Cord: DC 4.5V 200mA (Not Included) 7，Solar Panel: 6V 50mA Operating Current: 180mA Quiescent current: 2mA 8，Motion sensor activation: 15 feet 100 degree arc. 9，Ultrasonic frequency: 15KHz-25KHz (adjustable) 10，Effective range: 5000 square feet 11，Item Size: 16*13*9cm / 6.29*5.11*3.54in 12，Net Weight: 380g / 13.4oz Package: 1* Ultrasonic Bird Repeller Usage method: 1. Mount the unit with screws in an area with sufficient direct sunlight. For best performance, it is recommended to place the unit at least 3 feet above the ground for optimal range. Make sure the speaker is facing the area you want to cover. 2. Turn the frequency dial to the desired animal you want to repel. Different frequencies repel different animals. Some frequencies repel more than one animal. 3. Turn on the unit by pressing the ON / OFF button once. Once pressed, the LED will illuminate the network and wake the system if it detects any intruder movement. Battery recharge: If there is no sunlight or it rains continuously for a long time several days and the capacity of the batteries becomes very low, it is recommended to recharge the unit using the power cord (not included). There is a DC connector located on the back of the switch. Pull out the connector cover and insert the power cord plug into the DC connector.