ขาย Solar alarm light remote control Siren Strobe alarm Motion Sensor Security Alarm System for Farm infrared sound anti-the ราคาที่ดีที่สุด

1. The product is suitable for all-weather outdoor use, with IP65 waterproof function, energy saving / environmental protection / safety. 2. Applicable to homes, orchards, construction sites and other places that require security alarms. The sensing distance of 3.5-8 meters, the sensing angle of 110°, the high-pitched alarm of 110 decibels and the visible warning light of 1000 meters. 4. Upgrade the four-speed alarm mode, with 24/7 working mode and 12-hour night working mode; optional sound and light alarm and silent flash alarm. 5.30 days of long standby working time, the average daily solar charging for 1 hour can maintain 365 days of continuous working. 6. No need for wiring, no need to use electricity safely and safely, solar charging can cycle rechargeable lithium battery, ensuring that the product can be recycled for a long time. 7. Easy to install, can be used in any outdoor environment. 👉👉👉Alarm light product upgrade four gear instructions for use: 1. The first gear is the 24-hour induction sound and light alarm in the day mode; long press the switch for 3 seconds, when you hear the drop sound, it means to start the first mode, it will flash the light for about 35 seconds (the period is not prompted to work during the prompt phase) and then Enter the active state. When there is a moving object with body temperature, start the sound and light alarm from the front of the lamp at a level of 10-8 meters! The person continues to call the police within 35 seconds. Automatically mute off after 35 seconds! If there is any induction, continue to activate the sound and light alarm. 2. Press the second switch, the product will make a “beep” sound, the product will enter the 24-hour flash silent alarm mode (flash only, no sound); at the same time, the product will emit red light and flash slowly for about 35 seconds (this time period) The product is in an active state, the product does not sense an alarm), and then enters an active state. When there is a moving object with body temperature, start the sensorless flashing alarm from the front of the lamp at a level of 10-8 meters! The person continues to flash the alarm within 35 seconds. Automatically turn off the lights after 35 seconds! 3. The second gear is the night mode. During the day, it does not sense the work. It starts to work in the dark, and the second flash will flash for about 35 seconds (the period is not sensing during the reminder phase). The induction alarm mode is the same as the first sound and light alarm. 4. Press the fourth switch, the product will make a “beep” sound, the product will enter the night flash silent alarm mode (flash only, no sound) and the product will emit red light flash for about 35 seconds (this time period belongs to the product) When it is activated, the product will not sense the alarm) and then enter the activation state. The inductive alarm mode is the same as the second silent alarm. 5. Press the fifth down switch to shut down.