ขาย Pro Mobile Phone Anti-shake Three-axis Stabilizer,Handheld Gimbal Photography Stabilizer,Motion Camera Stabilizer,Blueto ราคาที่ดีที่สุด

Compatible with mobile phones of UNDER 6.5 inches,sports camera GOPRO HERO 4/3+/3/2/1/SJCAM series camera/xiaomi yi/GoPro Hero4 Session/hero5/hero6/hero7/EKEN series. [Packing box size]: 34.5CM × 15CM × 5CM [Product size]: 291mm ×120mm × 50mm [Net weight]: about 400g [Endurance time]: 4 hours (practical testing 6 hours) 【Rotate】 320 ° 【Bearing weight】 220g 【Battery】 3.7v / 2200mAh 【Input voltage】 5v 1A User Guides 1. Before official use, it is recommended to charge the handheld gimbal through the USB port for about 4 hours; 2. Refer to the instructions to fix the phone on the handheld gimbal and adjust the balance; 3. Press and hold the power button for about 3 seconds to boot; 4. Turn on the Bluetooth function of the mobile phone, connect the "GPH4" device to the available devices to establish a connection with the gimbal, open mobile phone camera, press MODE button to take pictures/video; Mobile phone balance adjustment method: Twist the balance adjustment button, adjust the telescopic arm to the left and right, the phone is in a relatively balanced state, and then tighten the button. NOTE: 1. Please be sure to install the mobile phone to ensure that the mobile phone is in a balanced state before turning on the handheld gimbal. 2.Mobile phone balance adjustment can make the gimbal work more power-saving. The gimbal can still work when there are many balance deviations in the mobile phone, but the motor will consume too much power, and at the same time, the increased stable torque will become smaller. Function Description 1. Mobile phone clip: Fixed 4-6.5 inch mobile phone/sport camera bracket; 2. Heading axis: 320 ° rotation, responsible for left and right stability of the picture; 3. Charging indicator: the red light is always on when charging; the green light is always on when fully charged; 4. Direction joystick: control the fine adjustment of the up, down, left and right of the screen when shooting; 5. Mode switching switch: Full lock state (camera is in a fixed direction) Semi-following state (camera is fixed in the horizontal direction) And full follow state (camera follows hand movement direction); 6. 1/4 thread bracket interface: tripod bracket interface (please connect a tripod when you need to shoot/live for a long time); 7. Camera/Camera button: When the phone is in photo mode, click to take a picture; when the phone is in video mode, click to turn on Start/stop recording; 8. Power on/off button: ①Long press for 3 seconds to turn on, long press for 3 seconds to turn off; ②Press twice continuously for a short time, the device quickly returns to the original setting position; 9. Working status indicator: ① During startup: red and green lights flash alternately; ② Standby: The green light is always on; ③ State transition: green light flashes; ④ Low voltage: red light flashes. Packing list: handheld gimbal X1; Tripod X1; USB data cable X1; product manual X1