ขาย Print Head Printer Head cleaning liquid cleaning fluid for Inkjet Printer ราคาที่ดีที่สุด

How to use Cleaning Liquid 1)Washing inside of the cartridge 2)Washing the cartridge nozzle 3)Refining the Cartridge Step 1 Wash the old cartridge with the Cleaning Liquid 1) Use your Cleaner or put the nozzle part in the container with the Cleaning Liquid. This will make the mass of solid ink dissolve (Caution!:No more than four hours!) 2) Remove remaining ink and Cleaning Liquid (especially around the nozzle part) Step 2 (refill ink) After refilling ink, extract a little ink using suction tool. Step 3 (refinement) 1) Print your document after you refill your ink to check the nozzle condition. 2) Then replace your cartridge with the nozzle facing upwards. 3) Put a few drops of Cleaning Liquid around the nozzle part. Let it sit for 3 minutes 4) Wipe off excess liquid from the cleaning cartridge with tissue paper and seal the liquid exit with the provided sealing stopper. 5) Put the cartridge into the provided sealing bag with liquid exit downwards. Seal the bag and place into the box for the next use 3. Black & Color Cartridge with foam (Pigment and /or Dye) Step 1 1)Put 5-7 drops of Cleaning Liquid around the nozzle with suction. Let it sit for 5-7 minutes 2)Remove the remaining ink and Cleaning Liquid with suction through the nozzle (extract about 1ml ink) 3) Wipe off excess liquid from cartridge. Let the cartridge sit on the wet tissue for 5 minutes. Step2(Refinement) 1) Print your document after you refill your ink to check the nozzle condition. 2) Wipe off the cartridge and seal the liquid exit with the provided sealing stopper. 3) Put the cartridge into the provided sealing bag with liquid exit downwards. Seal the bag and place into the box for the next use. Note: If printing still doesn't return to normal after repeating the step as above, this means your cartridge may be damaged, so it may be impossible to re-use it. 4. Signs of abnormality and printing resolution (for genera1 User) When the nozzle is clogged 1) Run your printer's head cleaner 1-2 times according to your printer's operation manual. 2) Put 5-10 drops of Cleaning Liquid around the nozzle. Let it sit for 3 minutes, wipe off excess liquid from the cleaning cartridge with tissue paper and then print your documents. 3) If printing still doesn't return to normal after repeating the step as above, this means your cartridge may be damaged. Therefore you must replace your cartridge. 4. Broken lines in your Document This happens when the Cleaning Liquid is left around cartridge nozzle. 1) By printing many pieces of paper, the remaining Cleaning Liquid should disperse When the nozzle is clogged after a long period of non-use. This happens when ink is solidified between ink nozzle and chamber of mesh. 1) Put 10-15 drops of Cleaning Liquid around the nozzle part. Let it sit for 5 minutes,. Wipe off excess liquid from the cleaning cartridge with tissue paper and print. 5) When you store it for a long time, store in a cool, dry place.