Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V (1)
Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V (2)
Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V (3)
Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V (4)
Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V (5)
Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V (6)
Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V (7)
Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V (8)
Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V (9)

ขาย Oop KONNWEI KW710 100-2000CCA อุปกรณ์ทดสอบแบตเตอรี่สําหรับรถยนต์รถบรรทุก 6V ราคาที่ดีที่สุด

0
การให้คะแนน
฿5,193
47% OFF
฿2,755
เรือจาก
ต่างประเทศ
Color
Black
Specifications
Standard

รายละเอียดสินค้า

🍭Welcome to the shop🍭 💎Characteristics💎 Kw710 battery testers can test all 6V, 12V, 24V car start lead acid batteries, including ordinary lead acid batteries, AGM flat batteries, AGM spiral batteries, colloid batteries, etc. The use of the most advanced electrical conductivity testing technology in the industry can easily, quickly and accurately measure the actual cold-start current capacity of a vehicle start battery, the health of the battery itself, and the common faults and charging system of the vehicle start-up system, which can help maintainers to quickly and accurately identify problems and thus achieve rapid maintenance of the vehicle. The performance of the start-up and charging system depends on the battery's health.Verify that the battery is good and full of electricity, and need to check the start-up and charging system.During the car test, the tester will further test the start-up and charging system. A variety of languages are available: chinese, english, german, french, japanese, korean, dutch, russian, spanish, italian, portuguese, polish, persian. Note: if tested on a vehicle, please diskonnect all loads, do not pull keys at ignition location, and close the door.Connect the red clip to the positive (+) end of the battery and the black clip to the negative (-) end.After connecting, shake the clip back and forth to make the connection strong.Before testing the battery, two clips are needed to connect the terminals firmly.The best test location is the battery connection port.If the battery cannot be connected from the junction, try testing at the jumper, but the measured data may be lower than the actual value. Other functions include: Battery testing ranges from 100 to 2000 CCA; Bad cell detection function; Polar misunderstanding protection; Batteries measuring deep diskharge; Battery specification tests (CCA, JIS, EN, DIN, SAE, IEC); 📦Packing list📦 1x KW710 battery analyzer

จากร้านเดียวกัน

รายการที่เกี่ยวข้อง

คุณอาจชอบ