ขาย 【In Stock】220V 5.5KW อินพุต 3 เฟสความถี่อินเวอร์เตอร์ Vfd เอาท์พุทควบคุมความเร็วมอเตอร์ ราคาที่ดีที่สุด
0
การให้คะแนน
฿8,835
| เรือจาก | ต่างประเทศ |
|---|
รายละเอียดสินค้า
Please add this item to your watchlist to receive price updates by email.
Here's how:
Click the Add to Watch List button under the Place bid or Buy It Now buttons.
Name: frequency converter
Model: 893725
Specifications:
Power: 5.5KW
Input: AC 1PH 220V 50Hz-60Hz
Output: AC 3PH 0V-220V
Temperature: -40°C~+70°C
Modulation: Area Voltage Vector Modulation
Cooling method: air cooled with fan controller
black
Size: 210mm*175mm*116mm
Characteristics
- The control panel is simple and easy to understand.
- Fast heat dissipation and longer service life.
- Through the built-in PLC or control terminal to achieve multi-speed operation, control operation panel
The terminals can be replaced in a number of ways.
- LED shows the set frequency, output frequency, output voltage and output current and other parameters.
- Strong anti-interference ability, large low-frequency torque, high precision.
Safety precautions:
1. Before wiring, make sure the input light is off.
2. Wiring, please have professional electrical engineering personnel to operate.
3. Ground terminal, be sure to ground.
4. After the emergency stop wiring is completed, make sure the operation is correct.
5. The inverter output wire should not be connected to the shell, and the output wire must not be short-circuited.
6. Check whether the voltage of the AC main circuit matches the voltage of the inverter.
7. Do not perform the inverter withstand voltage test.
8. Please connect the brake resistor according to the wiring diagram.
9. Do not connect the wires to the output terminals U, V, W.
10. Do not connect the contactor to the output circuit.
11. Remember to install the protective cover before powering on. When removing the cover, be sure to disconnect the power supply.
12. Choose an inverter with reset and retry function, do not approach the mechanical device because the alarm will immediately restart when it stops.
13. After confirming that the working signal is cut off, the alarm can be reset. Alarm reset under working signal state, the inverter has
may start immediately
14. Do not touch the terminals of the inverter, the high voltage terminals are very dangerous.
15. Do not change the wires and disconnect the connector after power on.
16. Cut off the main circuit power before inspection and maintenance.
17. Do not modify the inverter.
Package included:
1 x Frequency converter
1 x English Manual
