ขาย เครื่องชั่งน้ําหนักอิเล็กทรอนิกส์เซนเซอร์ Aot .Load Cell 10 กก . + Hx 711 Ad ราคาที่ดีที่สุด

Description: 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Links to tutorials and libraries: https://www.instructables.com/id/Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ or https://github.com/aguegu/ardulibs/tree/master/hx711 Works for raspberry pi The module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128. The input circuit can be configured to provide a bridge voltage electrical bridge (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module Two selectable differential input channels Technical Parameters Range: 0-10KG Output sensitivity: 1.0±0.1mV/V Zero output: ±0.1mV/V Nonlinear: 0.05% F.S Lag: 0.05% F.S Repeatability: 0.05% F.S Creep: 0.05% F.S/3min Output impedance: 1000±5% ohms Zero temperature drift: 0.05% F.S/10°C Temperature sensitivity drift: 0.05% F.S/10°C Load cell size: 81*13.5*13.5mm / 3.18*0.53*0.53in Lead Cable Motivation is positive: red Incentive negative: green Signal is positive: black signal Negative : white Note: Please allow 1-3mm slight deviation due to manual measurement. Thank you! One end of the sensor is fixed by the screw hole, the other end is kept in a floating state, and the gravity is applied in the direction indicated by the label. Special attention must be paid not to directly press the white rubber part to avoid damage to the sensor. Package included: 1 * Load Cell Weight Sensor 1 * HX711 Module