ขาย Dotbit 3D Printing Buildplate Steel Spring Sheet Bed 310x310mm/12.2x12.2 Inch Steel Plate with PEI + Magnetic Sticker B ราคาที่ดีที่สุด

Custom designed PEI materials to make your print easy to adhere to the printing surface, flexible, removable Size:310*310mm/12.2*12.2 inch,PEI 305*305mm/12*12 inch for CR-10 10S Pro CR-X MP Maker Pro Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off! After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you. Feature: The Polyetherimide sheet comes with 3M 468MP adhesive already laminated to the PEI. Apply the PEI with slight pressure and at an angle to prevent and minimize air bubbles. Once applied set the print bed to 60C and apply pressure evenly across the PEI in a sweeping fashion to firmly set the adhesive. Please use a towel to avoid getting burned. Level the bed and set the height of the nozzle before printing. About How to install the PEI well on the Steel spring: clean the steel spring with some alcohol; rip off the PEI 3M adhesive, spray some alcohol on the PEI surface, then directly stick on the steel spring surface, rip off the PEI dustproof film PEI Sheet Use： Thickness: 0.17mm Compatible with PLA ABS PETG TPU and other most filaments. When the print is completed, let the bed cool, and the part will be easy to release from the PEI surface. Parts are actually easier to remove if released before the bed becomes completely cold. Magnetic Base: Magnetic base that is adhesive-backed for easy installation PEI Sheet Maintenance: Clean in between prints with isopropyl alcohol and a lint free rag. Acetone can be used instead of isopropyl alcohol, but the bed must be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life. Package Includes: 1X 310mm/12.2 inch Steel Spring 1X 305mm/12 inch PEI 1X 310mm/12.2 inch Magnetic sticker B side