ขาย DC 12v 12 CH Channel Wireless RF Remote Control Switch Transmitter + Receiver ราคาที่ดีที่สุด
0
การให้คะแนน
1
ขายแล้ว
฿999
35% OFF
฿650
เรือจาก | ต่างประเทศ |
---|
รายละเอียดสินค้า
100% Brand new and high quality
Feature:
Wireless control, easy to install
Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC180~250V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; The wireless RF signal can pass through walls, floors and doors.
This switch can learn different coding remote controls (such as 2262, 1527)
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes. If you use multi-button transmitter, you can control the controller with different buttons, it won’t affect each other.
Transmitting Frequency: 315MHz
The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding.
About Receiver:
Model No.: AK-RK12S-12
Channel: 12CH
Radio Frequency: 315MHZ
Operating Voltage: DC12V
Operating Type: Jog /Momentary/Non-Latched (Press and hold->;On, Release->;Off)
Interlock /Latched (Press ->; On; Press other button ->; Off)
Self-lock/Toggle (Press->;On, Press again->;Off)
Coding Type: learning code
Maximum Working Current: 10A
Output Mode: Without voltage output (also called Contact output)
Step-down approach: resistance-capacitance (RC)
About Transmitter:
Model No.: AK-12-12
Buttons: 12 Buttons
Working Voltage: DC12V (12V 23A Battery INCLUDED)
Operating frequency: 315MHz
Remote Control Distance: 200m (Distance open without interference theoretical distance, the practical application of the use of environmental disturbances decrease, estimated in accordance with the label 10% -30%)
Encode: Fixed code by soldering
Channel: 12 CH channel
Output/working way: jog, inter-lock, self -lock (can be change on yourself)
Jog-----press one button is "ON". Loosen your finger on the same button is "OFF". Need one channel switch and one buttons remote control)
Self -lock------ press one button for one time is "ON" .press the same button again is "OFF" .(need one channel switch and one buttons remote control
Inter-lock ------- press one button is "ON", press another button is "OFF". (Need one channel switch and 2 buttons remote control
Here is in set, we have make it work together, so you don't have to care about what frequency are they
Please note that: it is the control system in set here .you just can choose jog or self-lock working/output way here .for there are 12CH and 12buttons.
Decode: Learning code (it can learn several remote control and the working way can be changed)
How to learn changed the output /working way
About Learning and clearing Method:
A. jog/signal non-lock —press the No.1 button to learn
B. Self-lock press the No. 3 button to learn (each channel is independent, they won't interfere with each other
C. Inter-lock —press the No.2 button to learn
D. 1-4 button is self-lock .5-12 button is inte