ขาย Anycubic 3D Printing Resin 1kg - For SLA, DLP, LCD, LED 3D Printer fhJa ราคาที่ดีที่สุด
0
การให้คะแนน
฿2,353
เรือจาก | จังหวัดกรุงเทพมหานคร |
---|---|
Color | Skin Grey Clear White Black |
รายละเอียดสินค้า
UPDATED Q3 2021 PRICING
ANYCUBIC 3D Printer Resin 1kg
405nm SLA UV-Curing Resin
High Precision and Quick Curing
Excellent Fluidity for LCD 3D Printing
Parameter Information:
Hardness: 79 D
Viscosity(25°C): 552 mpa.s
Curing wavelength: 405 nm
Liquid density: 1.1g/cm³
Solid density: 1.184 g/cm³
Shrinkage: 0.071
Tensile strength: 23.4 Mpa
Curing time: 6-10 s
Elongation at break: 0.142
Main material: resin monomer & photo initiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
Precautions:
Storage Method:
Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
Usage:
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).