ขาย 6-พอร์ต Sata Iii Pcie Card, Pcie Sata Iii การ์ดควบคุม To 6GB/S อะแดปเตอร์แปลงภายใน Pci Sata 3.0 การ์ดขยาย ราคาที่ดีที่สุด
0
การให้คะแนน
2
ขายแล้ว
฿1,705
| เรือจาก | ต่างประเทศ |
|---|
รายละเอียดสินค้า
Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0; Comply with PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0.
Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of communication speed; Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Support 4 SATA; Support AHCI1.0 e and IDE e; Support native command queue (NCQ); Support FIS based on port multiplier switch or command switch.
Support hot swap and hot swap. Compatible with SATA6G, 3G and 1.5G hard drives; Bus interface: PCI-Express x1 slot; Expansion interface: 6 SATA3.0 interfaces
System requirements: There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16; Operating system: Windows10/8/7 (32/64 bit)/ Vista (32/64 bit)/ XP/2003/2008/linux
Synology can only recognize 4 disks, please know!
Product driver files:
1. CD: DRIVER/SATA CARD/Marvell/91XX_92XX Setup, then select the corresponding folder according to the system
The usage method of PCIE to SATA3.0 adapter card is as follows:
1. Connection conditions and solutions between system disk and PCIE to SATA3.0 adapter card:
1. The SATA interface e of PCIE to SATA3.0 is AHCI e. If you want to insert a system disk on our card, the premise is that your system disk must be installed in AHCI e when installing the system on the motherboard, otherwise it will not pass. Our card adapter card starts the system.
2. If it is determined that the system disk is inserted into the SATA interface of the motherboard to install the system in AHCI e, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot.
3. Both of the above conditions are met. If it still fails to boot or restarts repeatedly, then the motherboard hard disk interface may conflictwith our adapter card. The solution is to enter the motherboard BIOS and set the motherboard hard disk interface option to Disabled, save and restart to start the system
Material:Electronic component
colour:Black+ Blue
Package Contents:
1 X PCIe X1 to 6 SATA 3.0 port controller card
1 X Driver CD
6 x Sata 3.0 cable
1 X low bracket
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
